Warm Summer Days have departed

Your 12 monthly Central Heating Overhaul is fundamental to your loved ones health and your bank account.

 

Frequent central heating check ups will look after your home and has the potential to lead to smaller home heating bills.

 

Carbon Monoxide Gas poisoning can hit with a badly maintained boiler. It can also be inefficient expanding your heating costs.

 

If you want an effective and secure gas heating system you must have a regular and ongoing care programme.

 

Your boiler cost a lot to instal and burns high cost gas so you should have it inspected every year to keep it running satisfactorily.  A well designed service programme will also illuminate any safety matters.

 

A dependable central heating system is a regularly serviced boiler, it could also be a more effective boiler with smaller heating costs}. {Boiler efficiency is improved, cutting your gas costs, and you can relax aware that your boiler is working safely.

 

Peace of mind flows from a planned heating inspection as you recognise your boiler should be more efficient for the following year and is not pumping out any unsafe gases.

 

Check a combination boiler for room economy

Smaller homes can benefit from fitting a combi gas boiler as they need much less space than orthodox heating boilers. With just a combination gas boiler and balanced flue you have all the components you require to install a full central heating system. To complete the heating you just need radiators, the required fittings and a quantity of copper pipes. Your first reaction maybe that we had forgotten some components. The hot water storage cylinder, the feed and expansion tank ordinarily put in the attic, the central heating pump and other component components that central heating and hot water systems seem to need.

The response to your queries would be that with a typical combination gas boiler you do require these component parts. The hot water storage cylinder can be excluded from your system, you do not need a feed and expansion cylinder up in the loft, the combination boiler also incorporates the other small components. So you can see with a combi gas boiler you can save a respectable amount of space within your dwelling house.

Do not think that all this is new as combi gas boilers have been fitted for a while now. The combination has been more popular in the Continent than in the U.K., but is now being fitted more frequently as an alternative to the traditional wall mounted gas boiler.  By comparison with conventional heating boilers you will see that there are two main differences. A fully sealed system contains the circulating hot water for the central heating. The benefit of this is that there is no need to fit a feed and expansion tank in the attic. A second gain is withdrawing the need for the hot water storage cylinder as the gas boiler stocks its own hot water.

Hot water is produced as you need it, turning on a hot water flags this requirement to the heating boiler. And economical internal heat exchanger enables the heating boiler to rapidly heat and cold water. Water from the sealed central heating circuit is heated and is diverted to the hot water heat exchanger heating it up. On the other side of the heat exchanger cold mains water is heated before finishing its journey to the hot water valve.

The boiler design gives priority to getting instant hot water. The moment the tap is shut the combination gas boiler will return to providing hot water to the radiators.

So in summary and combi heating boiler can save you a substantial amount of room in your dwelling house.

You need to choose the right boiler

If you want to achieve low CO2 emissions.

clipped from www.energysavingtrust.org.uk Boilers account for around 60% of the carbon dioxide emissions in a gas heated home. By fitting a new high efficiency condensing boiler with full heating controls, you will significantly cut your home’s carbon dioxide emissions and could save as much as �270 a year. the current lifespan of a boiler is around 15 years The best high efficiency condensing boilers convert more than 90% of their fuel into heat, compared to 78% for conventional types. Heating controls will keep your home at a comfortable temperature, making it warm when you want it but switching off when you don’t. you can use natural – or renewable – energy sources like heat from the sun or wood to heat your home and water

Warm Deal schems

Brief details of the warm deal scheme.

clipped from www.scotland.gov.uk Hot and cold tank and pipe insulation If you or your spouse are in receipt of certain income-related benefits, or are aged 60 or over, you may be eligible for a grant of up to �500 to have your home insulated under the Scottish Government’s Warm Deal. If you are aged 60 or over and not in receipt of income-related benefits, you can get a smaller grant of up to �125. The package includes: Cavity wall insulation Loft insulation Draughtproofing Advice on energy efficiency is given

Insulate your hot water tank

You could save over �30 per year with a simple diy job.

clipped from www.energysavingtrust.org.uk Insulating your hot water cylinder is one of the simplest and easiest ways to save energy and money. Fitting a British Standard ‘jacket’ around your cylinder will cut heat loss by over 75%. If you already have a jacket fitted, check that it’s at least 75mm thick. If not, it’s well worth treating your old cylinder to a new winter coat. A new, 75mm thick hot water cylinder jacket will save you around �30 per year. The jackets themselves cost about half that, meaning that you’ll reclaim your initial cost in around 6 months. Insulation for hot water pipes will cost between �5 and �10 and save you around �10 a year, which means you should recover the cost of fitting within a year. You’ll be saving about 195kg of carbon dioxide (CO2) when you fit a British standard hot water cylinder jacket and around 65kg of CO2 with pipe insulation.

Cost-efficient combi-boilers

It seems that each month gas prices are increasing resulting in higher heating bills. If you use gas central heating your boiler is a large user gas and large proportion of your gas bill. You could cut your gas costs by up to 35% if you instal a new gas-saving condensing combi boiler.

The central heating gas boiler heats water for both washing items and heating the radiators. Your current boiler will have an anticipated life off up to fifteen years. If your boiler is nearing the end of its lifetime it could be very uneconomical in comparison to younger models. You can evaluate the comparative efficiency of boilers by looking at their SEDBUK evaluation, SEDBUK A ranking is the most economical at 95% efficiency in pulling heat from the gas consumed.

Observing that this it could be cost effective to exchange your boiler if your current model is nearing the end of its life-time. A new central heating boiler should lead to a large reduction in your gas heating bills. If you have a smaller home with a intermediate need for hot water a combi boiler is probably the best option for you. Your hot water storage cylinder becomes redundant with a gas combi-boiler which heats water on need. If you have a combination boiler you will find that hot water may not be ready in the kitchen if you are filling a hot bath as it heats the hot water as required.

A average boiler will use a hot water cylinder to store hot water it develops during the day. This is the most inefficient method and the heat losses are great even with a fully lagged tank. If you have a smaller household you will find that you could have other uses for the space that the hot water tank takes up.

getting rid of the storage cylinder by installing a combi boiler means that your central heating system will be up to 60% more efficient. Another variant of the combination boiler is the combi condensing boiler which is able to extract waste heat from the flue gases and use this to heat water when necessary. Taking saved heat back into the hot water heating process significantly trims the requirement for gas use and will lead to a further step-down in your heating bills.

The impact of energy saving measures

If you want to reduce your carbon output you might be willing but not know where to start.

This site helps you to assess the impact of any actions you take before you start.

A painless way to develop your action plan.

clipped from www.energysavingtrust.org.uk Energy saving checklist Start by selecting your main heating type, you will then be asked for your house type, followed by the number of bedrooms in your home. This will help us to give you a more accurate result for the amount of money and CO2 you could save. There are lots of ways you can reduce your carbon dioxide (CO2) emissions to help fight climate change. This simple tool will show you how much CO2 and money you can save by taking some simple energy saving measures.

Preserve storage space with a combi heating boiler

Combination boiler systems offer many storage space saving and gas economy benefits for the small dwelling house. With just a combi gas boiler and balanced flue you have all the component parts you need to install a full central heating system. All that is additionally called for to heat your rooms is some copper pipes and some radiators. You could be stunned by this and ask whether we had forgotten about some component parts. Central heating systems seem to need a hot water tank to store water, a feed and enlargement tank in the loft and a water pump to move everything around.

If you have a contemporary combi heating boiler it will not need any of these incremental pieces. With a combi you can dispense with the hot water storage tank, storage space in the attic can be saved by leaving out the feed and expansion tank, the combi heating boiler casing also has storage space to contain the other components mentioned. This gets rid of the requirement for a set of components, which take up a lot of room in your home.

Whilst you might consider all this is new actually combi gas boilers have been fitted for a number of years. They have a longer history in the Continent but have now become the most common heating boiler in the United Kingdom. There are two leading deviations between this form of gas boiler and its better known alternatives. The central heating hot water circulation system is sealed. This means that there is no need for a feed and enlargement tank in the loft. The boiler itself contains a large capacity expansion cylinder but again this is part of the sealed unit.

Domestic hot water is produced as required, the heating boiler is aware of this when you turn on a hot water tap. And efficient internal heat exchanger enables the gas boiler to quickly heat and cold water. The heat exchanger is heated by clever use of the existing hot water in the central heating system. On the other side of the heat exchanger cold mains water is heated before completing its journey to the hot water tap.

Hot water production is prioritised ahead of the transit of hot water to the radiators. The instant the valve is shut the combination gas boiler will return to offering hot water to the radiators.

If you do have a storage space issue in your house you should give great thought to installing a combination gas boiler when you next replace your gas boiler.

Protect your central heating combi boiler

All combi boilers have an issue at some moment in their lives and you will require a plumber to visit to assist you to solve it. The law prescribes that a CORGI certified engineer is necessary to address many maintenance problems with a central heating boiler. Additionally specialist tools and monitoring equipment may be required. Accordingly this will be a task that can not be remedied by a common odd-job man.

This will not be an issue if you have taken out a gas boiler care policy beforehand. You will rapidly get in the experts you need to call and assist you with your problem.

If you are thinking of choosing a combi gas boiler care policy then this article will spotlight the primary Providers that you might want to consider.

British Gas have all of the functions in your home can be covered with their Home Care range. Home Care 100 is a central heating boiler emergency breakdown and maintenance service for your gas boiler, timers, connected electrical temperature controls pump and programmer. Help is accessible every day of the year with a twenty four hour telephone line They have 5500 CORGI registered gas engineers. Once you commit to the monthly subscription your troubles are over as this service covers unlimited callouts and any manpower or parts bills.

Another major utility is E.ON who offer Central Heating Care which gives you maintenance, repair and emergency breakdown protection for your whole central heating system. With this service you get sure-handed plumbing assistance the moment you have an issue with your central heating. Within the first 28 days you will receive a safety inspection which also will ensure that your central heating system is working properly. If you keep the insurance running in future years you will also get an annual safety and maintenance review.

Our last supplier is Homeserve with their protection for your gas boiler and pump together with any electrical faults that they receive. You get a 24 hour claim line and a promise of a fast response to help you and a warranty on all permanent repairs for the lifespan of your cover. Homeserve approve CORGI certified plumbers who are then used to carry out the work and address your issue.

These three companies are the leaders in their field but only represent a small number on the heating boiler care plans which are offered. The choice is great. This choice means that there is a range of services for every budget and the opportunity for everybody to protect their boiler. Grasp the opportunity and free yourself from the problem of identifying an emergency engineer. Set Up your heating boiler protection beforehand.

Masterful combi gas boiler fitting

There various types of condensing gas boiler and one main form is a combination boiler. One of the reasons why combi central heating boilers are very popular is that they can heat water when needed.

As they have specific installation requirements it is essential that you have an heating audit conducted before you complete on the buy. If you use a trained heating installer to conduct a audit they will ensure that you comply with the building rules. It is sometimes more difficult to install a condensing rather than a non-condensing boiler for various reasons.

The exhaust gases from the flue tend to be cooler and hence less buoyant than for an older gas fired boiler form an easily seen plume can often be the result as the cooler gases will condense more quickly. They may cause wetting of areas too close to the end of the flue,, this impact is not restricted to your home and can spill over on to neighbouring properties, the plume can also cause irritation for any people traveling by your home.

An existing flue designed for a non-condensing gas boiler is unsuitable for a condensing boiler and vice versa. To complete the fitting you could find that the flue will need to be converted. The condensing gas boiler flue must also not be shared with any non-condensing gas appliance.

An external drain point is needed to facilitate the removal of the condensation which will form within boiler.

Many of these matters have been faced by other householders and there are simple solution is to overcome them. The advantage of using a trained fitter is that they will know of these. Condensing heating boilers are typically more efficient than the older boiler that they replace and any extra set up costs should be set off against this reduced life-time running cost.

Having a new gas fired boiler set up allows you some alternatives on the positioning of the new heating boiler. The new installation requirements will often dictate a change in gas fired boiler location. The replacement of an open flue or back heating boiler are good illustrations of this. They are often missing an external flue.

Most rooms in the house can be used other than the main living room. In addition to the kitchen or utility room often the attic or bedrooms are used for gas fired boiler set up.

setting up the boiler in the loft often saves room and it is possible providing that the gas fired boiler is a sealed system. Access to the attic has to be provided through a drop down loft latter attached to the loft hatch. The floor has to be boarded from the hatch to the heating boiler location and there has to be sufficient lighting in the loft. This will permit an engineer to get access to the heating boiler for maintenance and servicing.